Shower Remodeling in Dallas, TX

The grout has gone dark no matter how hard you scrub. A tile near the floor sounds hollow when you tap it. The valve takes three tries to find a temperature you can stand. You are done patching this shower. You want one that looks good, works properly and stays dry behind the walls.

Shower remodeling is a common upgrade for homeowners in Dallas who want to improve the appearance and functionality of their bathrooms. Modern shower designs often include tile surrounds, walk-in shower layouts, and upgraded fixtures. What decides whether yours lasts is the part you never see: the waterproofing, the slope of the floor and the valve inside the wall.

The Flooring & Remodeling Shop provides shower remodeling services for homeowners throughout Dallas who want to update their bathrooms with professionally installed shower systems. We design the shower with you, take out the old one, rebuild it from the framing out and finish it with tile, glass and fixtures. We work from our showroom in Plano and serve homes across the City of Dallas.

Call (972) 746-1575 · Request a written estimate

What your Dallas shower remodel includes

A shower remodel is several trades in a small space. Here is what the work covers:

  • Design and selections. Layout, size, tile, valve, showerhead, niche, bench and glass, chosen before demolition. Tile and fixture samples are at our Plano showroom.
  • Measuring and a written estimate. The estimate sets out the scope: demolition, plumbing, waterproofing, tile, glass and fixtures.
  • Demolition. The old tile, pan or tub, glass and fixtures come out, and the framing is exposed.
  • Framing and plumbing. Repairs to what the demolition uncovers, the new valve, the drain and any supply lines that need replacing.
  • Permits and inspections. We pull the required permits and coordinate inspections.
  • Waterproofing. A continuous system on the walls and floor, with the floor sloped to the drain.
  • Tile, glass and trim. Wall and floor tile, the niche, the enclosure and the finished fixtures.

Our installations include a written 1-year workmanship warranty. 0% financing is available for qualified homeowners.

Dallas homes span seventy years, and your shower shows it

Dallas is an older city than its northern neighbors. The median home in the City of Dallas was built in 1981. About one in three homes was built before 1970 (U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates). In the newer suburbs to the north, the median home dates from the 1990s or 2000s.

That range matters because the age of your house tells you a lot about what is behind the shower wall. These are conditions homes of each era can have. Yours will only be known once the old shower is open.

If your home was built… What you may find behind the shower What it means for the job
Before 1970 Thick mortar-bed (“mud-set”) walls on metal lath; a mortar shower floor over an old liner; galvanized steel supply pipes; cast-iron drains Heavier demolition. Old pipes are inspected once exposed and often replaced while the wall is open
1970 to 1999 A fiberglass tub-shower unit, or tile on early backer board or drywall; a shower pan liner near the end of its life Water may have reached the framing at the curb or corners. Expect to repair some framing
2000 and later Tile on cement board with a liner, or a one-piece unit Usually sound framing; the remodel is mostly about size, style and a better valve

Slab or pier-and-beam. Many Dallas homes sit on a concrete slab, where moving a drain means cutting concrete. Some older homes sit on pier-and-beam foundations with a crawlspace instead. There the drain may be reachable from below, but the floor framing has to be stiff enough for a tiled shower floor. Either way, the foundation shapes where the drain can go.

Condos and townhomes. Fewer than half of Dallas homes are detached houses (41.3%, same Census source). If your shower shares walls, floors or plumbing with a neighbor, there is more to plan. See the section on condos below.

Call (972) 746-1575 · Request a written estimate

Why showers fail: water gets past the tile

Tile and grout look waterproof. They are not. Grout is porous, and some water passes through it every time you shower. In an old shower, that water soaks into the mortar or backer behind the tile. Then it drains to a liner under the floor, if there is one and it is still intact.

When that liner cracks, or the curb was built badly, the water goes somewhere else. It rots the bottom plate of the wall. It softens the subfloor. In a two-story house, it stains the ceiling below. The tile on the surface can look fine the whole time.

A rebuilt shower fixes the cause, not the symptom:

  • A continuous waterproofing layer on the walls and floor, sealed at every seam, corner, niche and pipe.
  • A floor sloped to the drain, so water never sits in the corners.
  • A curb and threshold built so water stays inside the shower.
  • A water test before tile. On a tiled floor, ask for the waterproofing to be flood-tested before any tile is set.

“Can’t you just tile over the old tile?” You will hear it offered. It hides whatever is behind the old tile, thickens every edge and leaves the waterproofing a mystery. If your shower is already leaking, new tile on top only covers the evidence. The shower that lasts is rebuilt from the framing out.

Which shower project do you have?

A shower remodel is usually one of four projects. Knowing which one you have makes the estimate clearer.

What you want The project What usually changes
A fresh look on a sound shower Re-tile and refit in the same footprint Tile, waterproofing, valve, glass
To stop a leak or rot Full rebuild from the framing out Framing repair, liner, waterproofing, possibly drain and supply lines
To lose a tub you never use Tub-to-shower conversion in the tub’s alcove Drain position, valve height, wall height of the waterproofing
A bigger shower Enlarging into a closet, a tub space or a linen cabinet Framing, drain, sometimes the layout of the whole room

Will a shower fit in our small bathroom? Usually, yes. The residential code sets a minimum shower size of 30 inches in each direction, with a minimum floor area. A standard tub alcove, about five feet long, gives you room for a comfortable shower with a bench or niche. If you want more than that, the project becomes a larger bathroom remodel in Dallas.

Removing your only tub? Think about resale first. Buyers with young children often look for one bathtub in the house. Converting one of two tubs rarely raises that question.

Call (972) 746-1575 · Request a written estimate

The valve and the fixtures

The valve is the brass body inside the wall that mixes hot and cold water. The handle is only its trim. Current plumbing codes require a shower valve that guards against sudden temperature swings, either pressure-balancing or thermostatic.

  • Pressure-balancing valves keep the temperature steady when someone flushes a toilet. One handle usually controls both temperature and flow. They suit most single-head showers.
  • Thermostatic valves hold a set temperature and usually separate temperature from volume. They suit showers with a fixed head and a handheld, or anyone who wants the same temperature every morning.

If your home still has an original two-handle valve, replacing it is the change you will notice every day. The wall is open anyway, so this is the time.

Fixtures to plan with the valve:

  • A handheld on a slide bar makes rinsing, cleaning and bathing children easier.
  • Showerhead height should suit the tallest regular user.
  • Controls near the entry let you turn the water on without stepping into a cold spray.
  • Blocking in the wall for a future grab bar costs little now and is hard to add later.

Federal rules cap showerheads at 2.5 gallons per minute. EPA WaterSense-labeled heads use no more than 2.0 (EPA WaterSense). A well-designed low-flow head can feel stronger than an old, scaled one.

Tile, glass and the look of your home

A shower in a 1950s Dallas house and one in a 2010 townhome can both look right. They just look right in different ways.

If you want to keep the home’s original character If you want a clean, modern break
Subway tile with a classic bullnose or pencil edge Large-format porcelain with few grout lines
Small hex or penny-round tile on the floor Stone-look tile with a matte, slip-resistant finish
Cross-handle style trim on a modern valve A slim single-lever control
A framed or half-glass enclosure Frameless glass

Smaller tiles on the floor give you more grout lines, and more grip underfoot. Larger tiles on the walls mean less grout to clean. The glass is measured last, after the tile is finished, so it fits the walls as built.

Whatever the surface, the waterproofing, slope and valve underneath are the same modern system. Only the look is a style choice.

Call (972) 746-1575 · Request a written estimate

Lead paint and asbestos in older Dallas homes

With so many Dallas homes built before 1970, two federal rules matter more here than in newer suburbs.

  • Lead paint. The EPA’s Renovation, Repair and Painting Rule applies to paid work that disturbs painted surfaces in homes built before 1978. It requires lead-safe work practices by certified firms (EPA). Bathroom walls, trim and ceilings are painted surfaces.
  • Asbestos. In homes built before the 1980s, some flooring, adhesives, joint compounds and other materials can contain asbestos. If you suspect it, have it tested by a qualified inspector before anyone disturbs it (EPA).

Ask any contractor bidding an older-home shower how they handle both. The answer should be specific.

Remodeling a shower in a Dallas condo or townhome

If your bathroom shares walls, floors or plumbing with a neighbor, plan these before you choose a design:

  • Your association’s rules. Many associations set work hours and require approval before bathroom work. Get the rules in writing early.
  • Shared plumbing. Drain and supply lines may serve more than one unit, so shutting off water may need coordination.
  • The unit below. In an upstairs unit, your shower floor sits over a neighbor’s ceiling. The waterproofing and drain connection matter even more.
  • Moving the drain. In a stacked building, the drain usually has to stay close to where it is. Choose a layout that respects that.
  • Access. Elevators, stairwells, parking and where the debris goes.

How a Dallas shower remodel runs

  1. Visit and measure. We look at the shower, the ceiling below, the valve, the plumbing access and the age of the house.
  2. Design and selections, settled before demolition so your bathroom is not left open waiting on a decision.
  3. Written estimate. Ask how hidden conditions, such as rot or old pipes, are handled and priced.
  4. Testing, by a qualified inspector, if the age of the house calls for it.
  5. Protection and demolition. If damage is found, ask to see it before anything is closed up.
  6. Framing, plumbing and inspection. We pull the required permits and coordinate inspections.
  7. Waterproofing, tile and grout.
  8. Glass, trim and a final walkthrough of how the controls work and how to care for the shower.

Our bathroom remodeling process page explains each stage in more depth.

What drives the cost of a shower remodel in Dallas

Every estimate is written for your bathroom. These are the factors that move it:

  • Demolition: a mortar-bed shower is heavier work than a fiberglass unit.
  • Hidden conditions: rot, a failed liner, damaged framing or subfloor.
  • Plumbing: a new valve, replacing old supply lines, moving or repairing the drain.
  • Foundation: cutting a slab to move a drain, or stiffening framing over a crawlspace.
  • Size: keeping the footprint, or enlarging into the space next to it.
  • Tile: material, size and how complex the pattern is.
  • Glass: framed, semi-frameless or frameless.
  • Extras: a bench, niches, a handheld, a second outlet.
  • Older-home requirements: lead-safe practices and any material testing.

For more on budgeting, see our bathroom remodeling cost guide. 0% financing is available for qualified homeowners.

Why Dallas homeowners choose The Flooring & Remodeling Shop

  • 4.6★ from 90+ Google reviews. Read client reviews and see finished bathrooms in our remodeling gallery.
  • Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023).
  • 500+ flooring and remodeling projects completed under Sami’s leadership, and 60+ years combined experience.
  • Certified General Contractor with $1 million in insurance coverage.
  • In-house design and construction, so the shower, the bathroom floor and the rest of the room can be planned as one project.
  • NKBA-affiliated.
  • A written 1-year workmanship warranty on our installations.
  • Family-owned & locally operated. Sami personally responds to inquiries within 24 hours.

Call (972) 746-1575 · Request a written estimate

Master bathroom remodel

Shower remodeling questions from Dallas homeowners

Do you work in my part of Dallas?
We serve homes across the City of Dallas from our Plano showroom. Call (972) 746-1575 with your address and a description of the shower. If you live in North Dallas, our North Dallas shower remodeling page covers the homes there.

Our house is from the 1960s. Will the plumbing need replacing?
Not automatically. Have the pipes looked at once the remodel exposes them. Corroded supply lines or a cracked drain are best replaced while the wall is open.

Why does our shower temperature jump when someone flushes?
Older valves are not pressure-balancing. A modern pressure-balancing or thermostatic valve fixes it, and current codes require one in a new shower.

What if there is rot behind the tile?
It has to be repaired before the new shower is built over it. Ask that your estimate explain how hidden damage is shown to you and priced.

Can we keep the vintage look?
Yes. Classic tile shapes, edge trims and cross-handle trim on a modern valve give a period look over modern waterproofing.

Do we need a permit?
Work that changes plumbing generally does. We pull the required permits and coordinate inspections.

Can I see tile before I decide?
Yes. Tile and fixture samples are at our Plano showroom, Monday to Friday 11 to 5 and Saturday 11 to 4.

More answers are on our bathroom remodeling FAQ.

Get a shower remodeling estimate in Dallas

Tell us roughly when the house was built, what the shower looks like now and what bothers you most about it. If there is a stain on a ceiling below, mention it. We will look at the shower, measure, explain what may be behind the walls and give you a detailed written estimate.

Our showroom: 2830 W. 15th St., Suite 1, Plano, TX 75075. Monday–Friday 11–5, Saturday 11–4.

Call (972) 746-1575 · Request an estimate

We typically respond within 24 hours.

Ready to Transform Your Home?

Connect With Us Today

Call or Text (972) 746-1575

The Flooring & Remodeling Shop
2830 W. 15th St. Ste. 1, Plano, TX 75075
Serving Plano & North Dallas Suburbs