Hardwood Flooring Installation in North Dallas, TX

Your house went up sometime in the 1970s, 80s or 90s. Downstairs there is carpet in the living room, ceramic tile in the entry and kitchen, and maybe a square of parquet by the front door. Upstairs it is carpet again. You want one wood floor that runs through it all, without a ridge at every doorway. That is a very common North Dallas project, and most of the work is in what happens before the first board goes down.

Hardwood flooring remains one of the most popular flooring choices for homeowners because of its natural appearance and long-term durability. Properly installed hardwood flooring can enhance the character of a home while providing a long-lasting flooring surface. The Flooring & Remodeling Shop provides hardwood flooring installation services designed to upgrade residential interiors with natural wood flooring. We take up the old floors, prepare the slab and the upstairs subfloor, install solid or engineered hardwood by the method your product’s manufacturer specifies, and finish the stairs, transitions and trim.

You can compare full-size samples at our showroom, 2830 W. 15th St., Suite 1, Plano, a short drive from North Dallas.

Call (972) 746-1575 · Request a written estimate

North Dallas, and the houses in it

North Dallas is the northern part of the City of Dallas. It is an informal name, not a city boundary. It generally covers the Dallas neighborhoods north of Northwest Highway. Far North Dallas is the part above LBJ Freeway (I-635), and some descriptions add Lake Highlands. Most of North Dallas lies in Dallas County, with small parts in Collin and Denton counties. The suburbs to the north are separate cities, even though people sometimes call them North Dallas. On this page, North Dallas means homes inside the Dallas city limits.

Most of North Dallas was developed in the late 20th century. Across the City of Dallas as a whole, 40.5% of homes were built between 1970 and 1999 (U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, City of Dallas). There is no Census figure for North Dallas on its own, so treat what follows as what you are likely to find, not a rule.

If your home dates from those decades, expect some of this:

  • A concrete slab under the ground floor, rather than a crawl space.
  • A wood-framed second floor, if the house has two stories.
  • Wall-to-wall carpet in the living areas and bedrooms.
  • Ceramic tile in the entry, kitchen and breakfast area, set in mortar or thinset.
  • Parquet in an entry, dining room or study.
  • Carpeted stairs with a wood or tile landing at the bottom.
  • In some houses, a step-down den or a raised brick hearth.

Each of those changes how hardwood goes in. The sections below take them in the order you will meet them.

One house, two different subfloors

In a two-story North Dallas home, the ground floor and the upstairs are built differently. Hardwood treats them differently too.

Where What is under the carpet How hardwood usually goes in
Ground floor A concrete slab Engineered hardwood made to be glued down or floated over concrete, after a moisture test. Or solid hardwood over a plywood subfloor fastened to the slab. A few solid products are approved for glue-down
Upstairs Plywood or OSB over wood joists Solid or engineered hardwood nailed or stapled into the wood subfloor, normally across the joists, after loose spots are screwed down
The stairs Wood stair framing under carpet and pad New treads, nosings and risers planned with both floors’ heights (see below)

“Can the whole house have the same floor?” Usually, yes. Many engineered products are approved for more than one installation method. That lets the same plank, species and finish go on the slab downstairs and the wood subfloor upstairs, each installed the way its manufacturer allows. Solid hardwood can also run through both floors, but on the slab it needs a plywood subfloor first, which raises the ground floor.

Why the upstairs needs attention too. Carpet hides a lot. A subfloor that squeaks or dips under carpet will squeak under wood, and more loudly. Before installation, we check the subfloor for flatness, squeaks, moisture concerns and damage. Loose panels are fastened back to the joists, and high seams are sanded flat, so the new floor has a firm base.

Running one floor through rooms that had three

The hardest part of a continuous floor is not the wood. It is the old floors coming out, because each one leaves the slab at a different height and in a different state.

What comes out What it leaves behind What has to happen
Carpet, pad and tack strip Nail holes and staples at the edges Strip removed, holes filled, slab cleaned
Ceramic tile Mortar or thinset bonded to the slab Broken out and ground down to clean, flat concrete. This takes the most labor of any removal, and your estimate lists it on its own line
Parquet Black or brown adhesive Blocks removed, adhesive scraped and ground off
Sheet vinyl or vinyl tile Adhesive, sometimes old layers Tested first in older homes (see below)

The goal is one flat plane. When the tile entry sat higher than the carpeted living room, the slab under them may also differ: a patch here, a ridge of old mortar there. Those are ground and filled to the flatness the flooring manufacturer requires before any wood goes down.

Test before you tear out. Vinyl floors and their black adhesive, in houses built before the 1980s, may contain asbestos. That covers some of the oldest North Dallas houses. The U.S. EPA’s advice is to leave intact material undisturbed and to have anything suspect tested by a qualified inspector first (EPA).

Parquet you might keep. We refinish parquet floors. If yours is sound, firmly attached and a look you still like, refinishing it may beat replacing it. If you want to keep one room of parquet and put new hardwood around it, the transition between the two is planned at the start.

Step-down dens and hearths. If your den sits a step below the rest of the house, hardwood across that step needs a stair nose, and the height of the step changes with the new floor. A raised brick hearth gets a clean edge or a reducer where the wood meets it. Both are measured at the first visit, not discovered on installation day.

Call (972) 746-1575 · Request a written estimate

Getting the slab ready for wood

Wood and concrete do not get along on their own. Concrete gives off moisture, and wood swells and cups when it takes moisture in. That is why slab preparation decides whether a hardwood floor stays flat.

  1. Moisture testing. The National Wood Flooring Association and wood-floor makers call for a moisture test on the slab first. The numbers tell you whether the product needs a barrier or a moisture-control adhesive, and which ones its instructions accept.
  2. Flatness. Engineered planks follow the slab closely. A dip that carpet hid becomes a hollow spot that flexes underfoot. High spots are ground and low spots filled to the manufacturer’s tolerance.
  3. Cracks. Fine shrinkage cracks are common in slabs and are usually stable. A crack with one side higher than the other, or one that keeps opening, may be a sign the foundation is moving. Get that looked at by the right professional and settled first, because a new floor will not stop it.
  4. Clean concrete. Old adhesive, paint and mortar residue can stop a new adhesive from bonding. They come off first.

“The slab looked fine when the carpet came up.” It often does. Moisture and flatness are measured, not judged by eye, and the measurements are what the manufacturer’s installation instructions and warranty rely on.

Kitchens: up to the cabinets, or part of a remodel

North Dallas kitchens from this era often have ceramic tile that runs under the cabinets, or stops at them. Your choice depends on whether the cabinets are staying.

  • Cabinets staying. The new hardwood runs up to the cabinet base, and the toe-kick or a trim piece covers the edge. A floating floor has to be able to move, so it is never pinned under cabinets or an island. It stops at them with the expansion space its manufacturer requires.
  • Check the dishwasher. A new floor raises the height in front of it. If the dishwasher sits between cabinets on the old floor, it can end up trapped. That is checked before the wood is chosen.
  • Cabinets coming out. If you are remodeling the kitchen as well, the order of work is planned so the floor and the cabinets fit together. Because we also handle kitchen remodeling in Dallas, the floor and the kitchen can be one project.

“Is hardwood a bad idea in a kitchen?” Not if you wipe up spills promptly and use mats at the sink. If your kitchen sees a lot of water, wood-look tile or waterproof vinyl may suit that room better, and the floor can change at a natural break. Our wood-look tile installation in North Dallas page covers that option for North Dallas homes.

Stairs and landings

In many two-story North Dallas homes, the stairs are carpeted over wood framing, with a small wood or tile landing at the bottom. Once the living areas get hardwood, carpeted stairs can look out of place.

  • The heights have to work together. New flooring raises the bottom step’s landing and the top floor. Building codes allow very little variation between steps, so stair treads and risers are planned with both floors.
  • Treads and nosings. Stairs can get new hardwood treads and risers, or matching stair nosings where the wood floor meets the top and bottom steps.
  • Railings and balusters. For a bigger stair update, our staircase remodeling work can be planned together with the floor.

Call (972) 746-1575 · Request a written estimate

Choosing the wood

Hardwood flooring is available in a variety of wood species, finishes, and plank sizes. Each installation is completed carefully to ensure the flooring performs well and maintains its appearance over time. For a North Dallas house, three choices matter most.

Choice What to weigh
Solid or engineered Solid wood can be sanded many times over its life, but on a slab it needs a plywood subfloor. Engineered wood is a layer of real hardwood bonded to a more stable base, so it sits lower on a slab and moves less with the seasons. Its wear layer sets how many times it can be sanded
Plank width Wider planks look more modern and show seasonal gaps and cupping more. They also need a flatter floor
Finish A matte or low-sheen finish hides fine scratches and dust better than gloss, which matters with pets and children

Acclimation. The wood is delivered to your home and acclimated in your heated or cooled rooms, following the manufacturer’s instructions, so it is close to the conditions it will live in. Wood laid too dry can cup later; wood laid too damp can open gaps.

See it in your light. Bring home samples from the showroom, or start with a visit in your home. A finish that looks warm under showroom lights can look different beside a west-facing window.

If you own a condo or townhome

Parts of North Dallas also have condos and townhomes. If someone lives below you, check your association’s flooring rules before you choose a product. Many set a minimum sound rating, require a specific or equivalent underlayment, or need approval before work starts. The rating covers the whole assembly, so wood and underlayment are picked as a pair. Your written estimate names both, which gives you the details an approval form usually asks for.

How a North Dallas hardwood project runs

  1. First visit. We meet at your home, or you come to the Plano showroom to handle full-size planks.
  2. Measure and inspect: each room, stair and doorway; the slab and the upstairs subfloor; the old floors; and the heights at doors, cabinets and the hearth.
  3. Written estimate, detailed line by line: what comes out, what preparation each area needs, the materials, the stairs and the transitions.
  4. Acclimation. The wood settles into your heated or cooled rooms for as long as its maker specifies.
  5. Tear-out. Carpet, tile, parquet or vinyl comes up and is hauled away with the job.
  6. Preparation. Moisture control, grinding and filling downstairs; fastening and flattening upstairs.
  7. Installation, using the method the product’s manufacturer specifies for each subfloor.
  8. Finishing. Stairs, transitions and trim, then we walk the new floor with you and go over its care.

What drives the cost

Every estimate is written for your house, because these vary from one home to the next:

  • Your wood choice: solid or engineered, the species and grade, how wide the planks are and how thick the wear layer is.
  • How many old floors come out, and which ones. Tile and its mortar take far longer than carpet.
  • Slab preparation: grinding, filling and moisture control.
  • A plywood subfloor, if you choose solid wood on the slab.
  • Upstairs repairs: fastening and flattening the subfloor.
  • Stairs: the number of steps, and whether each gets new treads, risers and nosings.
  • Transitions: to tile, carpet, a step-down den or a hearth.
  • Testing of suspect older layers by a qualified inspector, where needed.
  • Trim: baseboards and shoe molding.

0% financing is available for qualified homeowners. Our flooring installation cost guide explains these factors in more depth.

Call (972) 746-1575 · Request a written estimate

Why North Dallas homeowners choose The Flooring & Remodeling Shop

  • 4.6★ from 90+ Google reviews. Read client reviews and see finished work in our remodeling gallery.
  • A showroom close by. See full-size samples at 2830 W. 15th St., Suite 1, Plano, then have the floor installed by the same company.
  • Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023).
  • 500+ flooring and remodeling projects completed under Sami’s leadership, and 60+ years combined experience.
  • Certified General Contractor with $1 million in insurance coverage.
  • In-house design and construction, so floors, stairs and kitchens can be planned as one project.
  • Our installations include a written 1-year workmanship warranty.
  • Family-owned & locally operated. Sami personally responds to inquiries within 24 hours.
Master bathroom remodel

Hardwood installation questions from North Dallas homeowners

Is North Dallas the same as the suburbs north of Dallas?
No. North Dallas is the northern part of the City of Dallas. The suburbs to its north are separate cities. We install hardwood in North Dallas from our Plano showroom.

Can hardwood go on our slab?
Yes. Engineered hardwood made for concrete is glued down or floated, depending on the product. Solid hardwood usually goes over a plywood subfloor, and a few solid products are approved for glue-down. The slab is tested for moisture and checked for flatness first.

Can the same wood run upstairs and downstairs?
Usually. Many engineered products are approved for both a slab and a wood subfloor, each installed by its own method. Solid wood can too, with a plywood subfloor on the slab.

Our entry and kitchen are tile. Can hardwood go over it?
Usually not. Wood over tile raises the floor and depends on every tile staying bonded. The tile and its mortar normally come out, and the slab is ground flat.

We have parquet in the entry. Does it have to go?
Not always. We refinish parquet, so a sound, firmly attached floor can stay. If it does come out, its adhesive is ground off so the slab is clean for the new wood.

Can the carpeted stairs match the new floor?
Yes. Stairs can get hardwood treads, risers and nosings, planned with the heights of both floors so the steps stay even.

Will the new floor trap the dishwasher?
It can, if the dishwasher sits on the old floor between cabinets. That height is checked at the first visit.

Where can we look at samples?
At our Plano showroom, open Monday to Friday 11 to 5 and Saturday 11 to 4. Or we can start with a visit to your home.

More answers are on our flooring installation FAQ.

Get a hardwood installation estimate in North Dallas

Tell us the decade your house went up, whether it has one story or two, what is on the floors now and which rooms you want in wood. Mention the stairs, a step-down den or a kitchen you plan to remodel. We will look at the floors and what is under them, measure, and give you a detailed written estimate.

Our showroom: 2830 W. 15th St., Suite 1, Plano, TX 75075. Monday–Friday 11–5, Saturday 11–4, Sunday closed.

Call (972) 746-1575 · Request a hardwood estimate

We typically respond within 24 hours.

Related: Hardwood flooring across the City of Dallas · Hardwood flooring in Plano · Hardwood vs. luxury vinyl plank · Shower remodeling in North Dallas

Ready to Transform Your Home?

Connect With Us Today

Call or Text (972) 746-1575

The Flooring & Remodeling Shop
2830 W. 15th St. Ste. 1, Plano, TX 75075
Serving Plano & North Dallas Suburbs