Wood Tile Flooring Installation in North Dallas, TX
The square tile in your entry, kitchen and breakfast room went in when the house was new. Now the grout is dark, a few tiles sound hollow, and the pattern stops at the living-room carpet. You want planks that look like wood and run through the whole ground floor, with the toughness of tile where the dog, the back door and the dishwasher live. Wood-look porcelain can do that. It just asks more of the floor underneath than the old squares ever did.
Wood tile flooring combines the natural appearance of wood with the durability of tile. This flooring option is often chosen by homeowners who want the look of hardwood while benefiting from the strength and moisture resistance of tile. The Flooring & Remodeling Shop provides wood tile flooring installation services designed to upgrade residential interiors with durable flooring materials. We take out the old tile and carpet, flatten the slab for long planks, lay the planks out so they read as wood, and finish the grout, joints, trims and transitions.
Full-size planks are on display at our showroom, 2830 W. 15th St., Suite 1, Plano, close to North Dallas.
4.6★ from 90+ Google reviews · Six-time Best of Plano award winner · Certified General Contractor
Where North Dallas is, and what its floors are made of
By North Dallas we mean the northern part of the City of Dallas, not the suburbs beyond it. The name is informal. It is generally used for the Dallas neighborhoods north of Northwest Highway, including Far North Dallas above LBJ Freeway (I-635), and some descriptions add Lake Highlands. Most of the area is in Dallas County; small parts fall in Collin and Denton counties. The cities to the north are separate, even when people call them North Dallas.
Much of North Dallas was built in the late 20th century. City-wide, 40.5% of Dallas homes date from 1970 to 1999 (U.S. Census Bureau, American Community Survey 2020–2024 5-year estimates, City of Dallas). No Census figure exists for North Dallas alone, so read the list below as what is likely, not certain.
For a tile project in a house from those decades, you will often find:
- A concrete slab under the ground floor, carrying its second or third floor covering.
- Square ceramic tile, often 12 or 18 inches, in the entry, kitchen, breakfast area and hall bath.
- Carpet in the living and family rooms, which you now want tiled too.
- A wood-framed upstairs, in a two-story house, with its own baths and sometimes the laundry room.
- A patio or pool door off the kitchen or family room, where wet feet come in.
Wood-look tile suits that kind of house well. The preparation is what makes it last.
Why the old square tile comes out
“Can’t the new planks go right over the old tile?” It is tempting, because demolition is the dusty part. With long planks, it is rarely a good idea:
- Height. Plank tile plus its mortar on top of the old tile and mortar can raise the floor enough to catch doors, block the dishwasher and leave a ridge at the carpet.
- Hidden failures. Hollow-sounding tiles have already lost their bond. New tile over them inherits the problem.
- The old grid. The old grout lines and any uneven tiles can telegraph into a long plank that bridges them.
What demolition involves. The old tile is broken out with the mortar under it, and the slab is ground back to clean, flat concrete. Baseboards often come off or get damaged in the process, so plan on new or reset base. Before work starts, find out how the rooms will be closed off, which return vents get covered and what will capture the dust.
Older layers. Vinyl tile, sheet vinyl and black adhesive from before the 1980s may contain asbestos. If you find layers like that under the tile or carpet, a qualified inspector should test them before they are broken up (EPA).
Flatness: what an old slab can get away with, and a plank cannot
A 12-inch square sits on a small patch of slab. It can rock slightly over a hump and still be set level. A 48-inch plank spans four times as much concrete, so the same hump rocks it, leaves a hollow under one end and lifts an edge above its neighbor.
The tile installation standard spells this out. For tile with any edge 15 inches or longer, ANSI A108.02 calls for a floor flat to within 1/8 inch over 10 feet and 1/16 inch over 24 inches. For smaller tile, the allowance over 10 feet is twice as large, 1/4 inch. A slab that suited your old squares can fall outside the plank limit.
What gets the slab there:
- Grinding high spots and old mortar ridges down.
- Patching or self-leveling low spots and dips.
- Mapping cracks. Fine, stable cracks get a crack-isolation membrane over them, so they do not show through the tile.
- Checking for movement. A crack with one side higher than the other, or one that keeps widening, can mean the foundation is moving. No membrane fixes that. Have it evaluated before tile goes down.
“The old tile never cracked, so the slab must be fine.” Small tiles hide a lot. The old floor tells you the slab was good enough for small tile, not that it is flat enough for planks.
Call (972) 746-1575 · Request a written estimate
A long, open ground floor needs room to move
When the tile ran only through the entry and kitchen, it covered a few small rooms. A plank floor through the whole ground floor can run 40 or 50 feet without a break. Tile, mortar and slab all expand and contract slightly with temperature and moisture. Sun through a large patio door warms the tile in its path more than the shaded floor beside it.
That is why the tile industry’s guidance (TCNA EJ171) calls for movement joints:
- At the perimeter, where tile meets walls, cabinets and columns. The gap is hidden under baseboard or filled with flexible sealant.
- Across large areas, at set spacings, and more often where the floor gets direct sun.
- Over joints already cut in the slab, which are carried up through the tile.
In the field, a movement joint is a line of flexible sealant colored to match the grout. In a wood-look layout it can usually be lined up with a plank edge, so it reads as one more joint. Without movement joints, a large tile floor can push itself up off the slab. The industry calls that tenting.
Upstairs baths and laundry: tile over wood framing
In a two-story house, an upstairs bath or laundry room sits on wood joists and a plywood or OSB subfloor, not concrete. Wood-look tile can go there too, if the floor is stiff enough. Tile-industry guidance for porcelain commonly calls for the floor to bend no more than L/360 of the joist span under load.
- The joists are checked for size, spacing and span.
- The subfloor usually gets a backer board or an uncoupling membrane over it, installed to that system’s own instructions.
- Loose panels are screwed down to the joists first, because movement under tile cracks grout.
A membrane reduces stress from small movements. It does not stiffen a floor that bounces. If an upstairs room cannot be made stiff enough for long planks, a smaller tile or a different floor may suit it better.
Choosing a plank that convinces
Bring these questions to the showroom, or ask them about any sample:
| Ask | Why it matters |
|---|---|
| Is it porcelain? | Under ANSI A137.1, only tile that takes up no more than 0.5% of its weight in water counts as porcelain. That density is why it holds up to chips better than ceramic, and why most floor-grade wood-look tile is porcelain |
| How many different faces? | More printed faces mean fewer repeats you can spot across a room |
| Is the surface textured? | A matte surface with grain texture reads as wood; a glossy one reads as tile |
| Rectified edges? | Edges ground square allow a narrow grout joint |
| What is the DCOF? | The wet-slip rating printed on the spec sheet. For a level indoor floor that may be wet underfoot, ANSI A326.3 sets the minimum at 0.42 |
| What length? | Longer planks look more like wood and need a flatter floor (see above) |
“Won’t it look like tile up close?” Kneel down and you will find grout lines and a cool, hard surface. Stand at the door and look across the room, and varied faces, narrow joints and a planned stagger make it read as boards. Layout carries half the effect.
Tile, wood or vinyl: room by room
Wood-look tile does not have to go everywhere. In a North Dallas house, it often earns its place on the ground floor and in the wet rooms, while another floor suits the bedrooms.
| Room | Why wood-look tile fits, or does not |
|---|---|
| Entry and halls | Grit, rain and heavy traffic. Porcelain wears well |
| Kitchen and breakfast area | Spills and dropped food wipe up. A dropped glass will break, though, and some people want more cushion for long hours of cooking |
| Patio or pool door | Wet feet and sunscreen clean off. Choose a textured, slip-rated plank |
| Laundry room and baths | Porcelain is not hurt by occasional water the way wood is. A bathroom floor still depends on sound grout and sealed edges |
| Bedrooms upstairs | Most people want a warmer, softer floor here. Wood over a framed floor is also easier than tile |
For the rooms where tile is not the best fit, see hardwood installation in North Dallas and luxury vinyl installation in North Dallas. The floors can meet at a doorway with a flush transition.
Call (972) 746-1575 · Request a written estimate
The layout that makes it read as wood
- Direction. Planks usually run along the longest view, often from the front door toward the back of the house, so the eye follows the boards.
- Stagger. Firing leaves a long porcelain plank very slightly bowed. The manufacturer’s guidance and the tile standard commonly limit the offset between rows to one-third of the plank length, so plank edges sit level. A random, wood-like pattern is planned within that limit, never a regular half-offset.
- Dry layout. Planks are pulled from several boxes and laid out first, so similar faces do not land side by side.
- Full support. Each plank is set in mortar with the back buttered, for full coverage under the ends. Leveling clips hold neighboring edges flush while the mortar cures. Uneven edges, called lippage, are prevented while setting. They cannot be fixed later without resetting tile.
- Grout. Keep the joint narrow and pick a grout that matches the plank’s base color, and the lines fade into the grain.
Doors, cabinets, stairs and the hearth
A new tile floor rarely sits at the old floor’s height. Before you pick the system, these are measured:
- Interior doors and the front door, which may need trimming or a new threshold.
- Kitchen cabinets. Tile can stop at the existing cabinet base, with the toe-kick covering the edge. If you are remodeling the kitchen too, the order is planned so floor and cabinets fit. Because we also handle kitchen remodeling in Dallas, both can be one project.
- The dishwasher. A higher floor in front of it can trap it under the counter. That height is checked first.
- Carpet, wood or vinyl next door, with a metal or tile-edge trim for a flush, safe change.
- The bottom stair, where tile meets a carpeted or wood staircase and needs a planned edge. If the stairs need new treads too, see our staircase remodeling work.
- A raised hearth or a step-down den, found in some homes of this era, which needs a clean tile edge or a bullnose.
If you are updating a bathroom at the same time, the floor can be planned with the shower and vanity. See shower remodeling in North Dallas.
How a North Dallas wood-look tile project runs
- A consultation at our Plano showroom or in your home, comparing full-size planks.
- Measuring and inspecting the old floors, the slab, any upstairs framing, door and appliance heights, and the wet areas.
- A detailed written estimate that lists the removal and each preparation step.
- Demolition and removal of the old tile, mortar and carpet, hauled away as part of the job.
- Preparation: grinding, leveling and crack isolation on the slab; stiffening and backer or membrane upstairs.
- Dry layout, then setting with full mortar coverage and edge leveling.
- Grout and movement joints.
- Trims, baseboards and transitions, then a final walkthrough with you.
Our installations include a written 1-year workmanship warranty.
What drives the cost of a wood-look tile floor
- The tear-out: the area of old tile and mortar, and how stubbornly it is stuck down.
- Slab flattening for long planks: grinding, patching and leveling.
- Crack isolation over existing slab cracks.
- Upstairs preparation: stiffening, backer board or membrane.
- Plank size and grade: longer planks need more preparation and more careful setting.
- Pattern: a plank stagger is the simplest; herringbone and chevron take more cutting and time.
- Movement joints and trims across a large open floor.
- Baseboards, door trimming and transitions for the new height.
- Testing of suspect older layers by a qualified inspector, where needed.
0% financing is available for qualified homeowners. Our flooring installation cost guide explains these factors.
Why North Dallas homeowners choose The Flooring & Remodeling Shop
- See the planks first. Compare full-size wood-look tile at 2830 W. 15th St., Suite 1, Plano, then have it installed by the same company. Wood tile flooring offers long-lasting performance and works well in kitchens, bathrooms, and other areas where durability is important.
- 4.6★ from 90+ Google reviews. Read client reviews and see finished work in our remodeling gallery.
- Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023).
- 500+ flooring and remodeling projects completed under Sami’s leadership, and 60+ years combined experience.
- Certified General Contractor with $1 million in insurance coverage.
- In-house design and construction, so a tile floor, a kitchen and a bathroom can be planned together.
- A written 1-year workmanship warranty on our installations.
- Family-owned & locally operated. Sami personally responds to inquiries within 24 hours.
Wood-look tile questions from North Dallas homeowners
Do you install wood-look tile in North Dallas?
Yes. North Dallas is the northern part of the City of Dallas, and we install wood-look tile there from our Plano showroom.
Can the planks go over our old square tile?
Rarely. The added height and any loose old tiles cause problems with long planks, so the old tile and its mortar usually come out.
Our old tile never cracked. Is the slab ready for planks?
Not necessarily. Long planks need a flatter floor than small squares. The slab is measured and ground or leveled where needed.
Why does a big tile floor need movement joints?
Tile, mortar and slab expand and contract slightly. Flexible joints at the edges and across large areas let them move without cracking or lifting.
Can wood-look tile go upstairs?
Yes, once the framed floor has been checked for stiffness and gets a suitable backer or membrane. A membrane does not fix a floor that bounces.
Will it be slippery when wet?
That depends on the plank you pick. Look for a DCOF of 0.42 or higher on the spec sheet, and a textured face for the kitchen, baths and the pool door.
Will the new floor trap our dishwasher?
It can, if the floor rises in front of a dishwasher set between cabinets. That height is checked at the first visit.
Where can we see the planks?
At our Plano showroom, open Monday to Friday 11 to 5 and Saturday 11 to 4. We can also begin with a visit to your home.
More answers are on our flooring installation FAQ.
Get a wood-look tile estimate in North Dallas
Tell us the rooms you have in mind, what covers them today, whether the house has one story or two, and whether a patio door, stairs or a kitchen remodel is part of the plan. We will measure, check the slab and any upstairs framing, and give you a detailed written estimate that lists each preparation step.
Our showroom: 2830 W. 15th St., Suite 1, Plano, TX 75075. Monday–Friday 11–5, Saturday 11–4, Sunday closed.
Call (972) 746-1575 · Request a wood tile estimate
We typically respond within 24 hours.
Related: Wood-look tile across the City of Dallas · Wood tile flooring in Plano · Flooring installation cost
Ready to Transform Your Home?
Connect With Us Today
Call or Text (972) 746-1575
The Flooring & Remodeling Shop
2830 W. 15th St. Ste. 1, Plano, TX 75075
Serving Plano & North Dallas Suburbs