Laminate Flooring in Richardson, TX

Newly installed wood look laminate flooring in a residential interior

Three planks by the dishwasher have swollen into little ridges. There is a gap in the hallway you can slide a coin into. And the living room floor makes a hollow click right where everyone walks. Your laminate is not that old. Can it be fixed, or is it time to start over?

Laminate gives you a practical, durable floor that looks like natural wood and resists everyday wear. It has also been around for decades. So if you already have it, the question is not “should we install laminate?” but “can our laminate be fixed, or does it need replacing?”

This page shows you what common laminate problems mean and when a single plank can be swapped. It also covers when to start over, what to replace it with, and how to install your new floor so it is easier to repair later.

For laminate construction, AC ratings and where it belongs, see the laminate flooring guide.

Call (972) 746-1575 · Request a written estimate

Common laminate problems, and what they usually mean

What you see Usual cause Usually fixable?
Swollen or peaked edges at a few joints Water reached the core at the seams (spill, pet, dishwasher, leak) Yes, by replacing the affected planks, once the water source is fixed and the subfloor is dry
Gaps opening between planks Floor installed without enough expansion space, heavy items pinning it, or an uneven subfloor Sometimes; persistent gaps across a room usually point to an installation or subfloor problem
Buckling across a room No expansion space at walls, or moisture from below Often requires taking the floor up and relaying or replacing
A chip or deep scratch Dropped object, furniture Small ones can be filled with a color-matched repair kit; larger damage means a new plank
Hollow sound or bounce Uneven subfloor, wrong or missing underlayment Only fixed properly by lifting the floor and correcting what is underneath
Worn-through surface in traffic paths Floor at the end of its life, or a low wear rating No: replace the floor

Replacing a single damaged plank

If you have click-lock laminate, one damaged plank in the middle of a room can be replaced:

  • From the nearest wall: the floor is unclicked row by row back to the damaged plank, which is swapped, and the rows are reassembled. Clean, but slow if the plank is far from a wall.
  • Cut out in place: the damaged plank is carefully cut out, and a new plank, with its locking profile trimmed, is glued in. Faster, but it has to be done with care to stay flat.

Either way you need a matching plank. Laminate collections are discontinued regularly, and even the same product can vary slightly between production runs.

When it is time to start over

Repairs make sense if your floor is otherwise sound and the damage is isolated. Replacement makes more sense when:

  • damage is spread across several rooms;
  • the floor buckles or gaps across whole areas, which points to an installation or subfloor problem;
  • the wear layer has worn through in traffic paths;
  • the product is discontinued and matching planks cannot be found;
  • the floor is a first-generation laminate with a core that swells at the slightest spill.

Richardson’s housing is older than in Plano, Allen, McKinney or Frisco: the median home was built in 1986 (U.S. Census Bureau, ACS 2020–2024 5-year estimates). If your laminate in an older home fails at the seams, the slab underneath may be the reason. Older slabs can be uneven, and some lack the vapor retarder newer slabs have. A new installation over a prepared slab fixes the cause, not just the planks.

Call (972) 746-1575 · Request an estimate

Replacing failed laminate: laminate again, or something else?

Your situation Often the better replacement
Dry rooms; the old floor failed from poor installation Laminate again, installed correctly over a leveled slab and vapor barrier
The old floor failed from water near a kitchen or bath Luxury vinyl or a kitchen-rated water-resistant laminate
You want a floor that can be refinished later Engineered hardwood
A rental between tenants Durable vinyl with spare planks kept for repairs

Ask why your old floor failed before you choose the new one. A water problem, an uneven slab or missing expansion space will ruin any floating floor.

Installing new laminate in a Richardson home so it lasts

  • Keep spare boxes from the same production run, stored flat indoors, for future repairs.
  • Choose a water-resistant product near kitchens and entries; the Frisco laminate page explains the ratings.
  • Level the slab and use the specified vapor barrier, so your seams stay tight.
  • Leave the full expansion space at walls and door frames, hidden by trim.
  • Use the manufacturer’s transitions and trims, not caulk, at doorways.
  • Record the product name and lot number with your home records.

A replacement installation runs in this order:

  1. Consultation: what failed, which rooms, and samples for the new floor.
  2. Inspection: moisture, flatness and the cause of the old failure.
  3. Removal and preparation: the old floor and underlayment out, the slab leveled, a vapor barrier down.
  4. Installation to the manufacturer’s instructions, with expansion space and trims.
  5. Walkthrough with care instructions.

What drives the cost

  • Removing the failed floor and its underlayment.
  • Finding and fixing the cause: a leak, slab moisture or an uneven slab.
  • Slab leveling and a vapor barrier.
  • The new product and its underlayment.
  • Trims and transitions, often replaced along with the floor.

See our flooring installation cost guide for the general factors.

Call (972) 746-1575 · Request an estimate

Who does the work

  • In-house design and construction
  • Certified General Contractor
  • $1 million in insurance coverage
  • 500+ flooring and remodeling projects completed under Sami’s leadership
  • Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023)
  • 60+ years combined experience
  • Our installations include a written 1-year workmanship warranty
  • 0% financing available for qualified homeowners

You can see samples at our showroom, 2830 W. 15th St., Suite 1, Plano (Mon–Fri 11–5, Sat 11–4).

Laminate questions from Richardson homeowners

Should we replace failed laminate with laminate again?
If it failed from poor installation in a dry room, yes, installed correctly. If water caused the failure, consider vinyl or a kitchen-rated water-resistant laminate.

Can swollen laminate go back to normal?
No. Once the core swells from water, it stays swollen. Swollen planks have to be replaced after the leak is fixed and the subfloor is dry.

Can one plank be replaced without redoing the floor?
Usually, by unclicking back from a wall or cutting the plank out, as long as a matching plank is available.

Why is our laminate separating?
Usually too little expansion space, heavy furniture or cabinets pinning it, or an uneven subfloor. If you see persistent gaps across a room, it usually needs relaying.

Our laminate sounds hollow. Can that be fixed?
Only by lifting your floor and correcting the subfloor or underlayment underneath.

What does laminate replacement cost?
The product, removal of your old floor, slab leveling and moisture protection are the main factors. See our flooring installation cost guide and the flooring installation FAQ.

Get a laminate estimate in Richardson

Tell us what you are seeing and which rooms are affected. We will measure the rooms and give you a detailed written estimate for a new installation. Ask what caused the old floor to fail, so the new one does not repeat it.

Call (972) 746-1575 · Request an estimate

We typically respond within 24 hours.

Related: Luxury vinyl flooring in Richardson · Hardwood flooring in Richardson · Laminate flooring in Allen · Laminate flooring guide

Ready to Transform Your Home?

Connect With Us Today

Call or Text (972) 746-1575

The Flooring & Remodeling Shop
2830 W. 15th St. Ste. 1, Plano, TX 75075
Serving Plano & North Dallas Suburbs