Laminate Flooring in Plano, TX

Cozy living room with laminate flooring.

The carpet in the bedrooms is tired. The kids, the dog and the game room are hard on everything. You want the look of wood without worrying about every scratch. That is the job laminate was made for.

Laminate gives you the appearance of wood combined with durability and easy maintenance. Its surface is resistant to scratches and everyday wear, so it suits living rooms, bedrooms and common areas. But proper installation is what ensures the flooring remains stable. Get it wrong and your laminate clicks, sounds hollow and peaks at the seams.

This page shows you how laminate is built, how to read the ratings on the box, where it belongs and where it does not, and what a careful installation looks like. Our showroom is in Plano at 2830 W. 15th St., Suite 1.

Call (972) 746-1575 · Request a written estimate

What laminate actually is

Laminate looks like wood but contains very little of it. Each plank is a sandwich of four layers:

  1. Wear layer. A clear, hard melamine surface that takes the scratches and scuffs.
  2. Design layer. A high-resolution photographic image of wood grain.
  3. Core. High-density fiberboard (HDF): compressed wood fibers and resin. It gives the plank its rigidity and its click-together edges.
  4. Backing. A balancing layer that keeps the plank flat.

That construction explains both laminate’s strengths and its one real weakness. The melamine surface is harder than most hardwood finishes, so laminate shrugs off pet claws and chair legs. The fiberboard core, though, is wood fiber. If water soaks into the core through a seam, it swells, and swollen laminate does not shrink back.

Why that matters: the questions you should ask about any laminate are how hard its surface is (the AC rating) and how well its seams keep water out of the core.

Reading the AC rating

Laminate is rated for abrasion resistance on the AC scale. The higher the number, the more traffic the surface is built for.

Rating Built for Where it fits in a home
AC1 Light residential Rarely sold for floors you walk on daily
AC2 General residential Bedrooms and closets
AC3 Heavy residential Any room in the house, including halls and living areas
AC4 General commercial Busy homes with kids and large dogs; entries and game rooms
AC5 Heavy commercial More than a home needs

For your home, AC3 or AC4 is usually the right range. AC4 costs a little more and is worth it in the rooms you punish most.

Thickness is not the same as quality. Thicker planks (12mm versus 8mm) feel more solid underfoot and bridge minor subfloor flaws better. They do not make the surface harder. A thin AC4 plank outlasts a thick AC2 plank.

Water-resistant or waterproof laminate?

This is where it is easy to buy the wrong floor.

Water-resistant laminate has sealed or tightly locking edges and a surface treatment that keeps spills out for a stated time. Wipe up a spill and your floor is fine. Leave standing water and it can reach the core.

Waterproof-marketed laminate uses tighter edge seals and water-repellent cores, and manufacturers warrant it against topical spills for longer periods. It is a real improvement. It is still a fiberboard core.

The difference that counts: a spill from above is one thing. Water arriving from below, from a slab, a leaking washer hose or a toilet seal, is another. No laminate is the right floor for a room where water is routine.

Room Laminate? Better choice if not
Bedrooms, living rooms, game rooms, halls Yes Not needed
Home office Yes, with a chair mat Not needed
Kitchen With care: a quality water-resistant product, spills wiped promptly Luxury vinyl
Stairs Yes, glued and fastened, never floated Not needed
Full bathrooms No Waterproof vinyl or wood-look tile
Laundry room No Waterproof vinyl or tile

For how to read a manufacturer’s water claim in detail, see laminate flooring in Frisco, a nearby city we serve.

Call (972) 746-1575 · Request an estimate

Laminate, luxury vinyl or hardwood?

All three look like wood. They behave very differently.

Laminate Luxury vinyl plank Hardwood
Surface Very hard melamine Softer vinyl wear layer Real wood; can dent
Scratch resistance Excellent Good Fair, depends on species and finish
Water Water-resistant; core can swell Waterproof core Damaged by standing water
Feel underfoot Firm, solid Slightly softer, warmer Natural wood
Sound Can be hollow if poorly installed Quieter Quiet when glued down
Refinish later No No Yes (solid, and engineered with enough wear layer)
Realism Very realistic, crisp embossing Very realistic The real thing

Pick laminate when scratch resistance matters most to you and your rooms are dry. Pick luxury vinyl when water exposure is likely. Pick hardwood when you want a floor you can refinish and value long-term.

For a room-by-room laminate or luxury vinyl answer, see laminate flooring in Allen, a nearby city we serve.

“Laminate looks cheap, doesn’t it?” Older laminate did: shiny, repeating patterns, a plastic sound. Current products use embossed-in-register texture, where the surface texture follows the printed grain, plus many unique plank images. In a showroom, side by side, you may not pick it out from wood until you touch it. For what makes laminate look real, see laminate flooring in McKinney, a nearby city we serve.

Installing laminate over a Plano slab

Nearly two in three Plano homes were built between 1970 and 1999 (U.S. Census Bureau, ACS 2020–2024 5-year estimates). If your home sits on a concrete slab, a laminate installation has three priorities.

1. A moisture barrier. Concrete releases moisture vapor. Laminate over a slab goes over a vapor barrier, either a separate polyethylene sheet or an underlayment with a built-in barrier, per the manufacturer’s instructions. Skip it and moisture can reach your floor’s core from below.

2. Flatness. Laminate floats: it clicks together and rests on the underlayment, not glued down. A floating floor over a dip flexes with every step you take. That flexing is what causes the hollow sound, the clicking, and eventually broken locking edges. Old tile mortar and slab high spots are ground down, low spots filled, until the slab meets the manufacturer’s flatness tolerance.

3. Room to move. Laminate expands and contracts with humidity. A gap is left at every wall and fixed object, hidden under baseboard or shoe molding. Large or long runs may need a transition joint. Your cabinets and kitchen islands are never set on top of a floating floor, because pinning it causes buckling.

Laminate on stairs

When carpet comes off your staircase, the treads underneath are usually construction-grade wood or particleboard, not meant to be seen. You have two ways to finish them in laminate.

Laminate with matching stair nosings Full replacement treads and risers
How Laminate cut and glued to each tread and riser, with a nosing made for the product at the front edge Old treads removed or capped with new treads and risers
Look Matches the floor; the nosing is a separate visible piece Clean one-piece edge; stained to match or contrast
Height Adds a little to each step Planned so every step stays equal
Time Each step cut and fitted by hand Similar or longer

Every step must stay the same height. Building codes limit how much riser heights can vary within a flight, because uneven steps cause trips. Adding material changes the top and bottom steps differently, so your stair should be measured and planned before anything is glued down.

Laminate is never floated on stairs. Each piece is glued and fastened. For grip in socks, you can choose a textured product, or add a fastened runner down the center. Our staircase remodeling page covers full stair rebuilds.

Call (972) 746-1575 · Request an estimate

Keeping laminate quiet upstairs

A hard floating floor upstairs replaces carpet that soaked up sound. Your footsteps can sound louder on the floor itself and in the rooms below. Four things keep it down:

  • Quality acoustic underlayment, or a product with a pre-attached pad. Never stack a second pad the manufacturer does not allow, which makes the floor spongy and stresses the joints.
  • Fix squeaks first. Upstairs floors sit on plywood or OSB. Loose areas are screwed down before laminate goes in.
  • Flatten the subfloor. Gaps under a floating floor cause the hollow click.
  • Rugs in bedrooms and game rooms.

How a laminate installation runs

  1. Consultation in the showroom or at your home: rooms, stairs and samples.
  2. Measure and inspect: every room and every step, door heights and transitions.
  3. A detailed written estimate.
  4. Delivery and acclimation in your conditioned house, per the manufacturer’s instructions.
  5. Removal: carpet, pad and tack strip, or old tile and mortar.
  6. Subfloor work: grinding, leveling, squeak repair, vapor barrier on slabs.
  7. Installation: floating floor with expansion space; glued and fastened laminate or new treads on stairs.
  8. Trims, transitions and baseboards, then a final walkthrough with you.

The step-by-step sequence is on our flooring installation process page.

What drives the cost of a laminate floor

We measure your home and give you a detailed written estimate, because these factors move the price more than the plank alone:

  • The product: AC rating, thickness, water resistance and realism.
  • Removing the old floor: carpet is quick; tile and mortar are not.
  • Subfloor preparation: grinding, leveling, squeak repair, vapor barrier.
  • Stairs: each step cut and fitted by hand; nosings or new treads.
  • Trims, transitions and baseboards between rooms.
  • Furniture moving and appliance pull-outs.

See the flooring installation cost guide for more on each. 0% financing is available for qualified homeowners.

Call (972) 746-1575 · Request an estimate

Caring for laminate

  • Vacuum or sweep regularly. Grit is what dulls any floor.
  • Clean with a damp, well-wrung microfiber mop. Never a soaking wet mop or a steam mop, which pushes water into the seams.
  • Wipe spills promptly.
  • Use felt pads under furniture and a mat under rolling chairs.
  • Keep a few spare planks and nosings from the original product. A damaged plank can usually be replaced with a spare.

Laminate in other cities we serve

We also serve these cities: Laminate flooring in Allen · Laminate flooring in Frisco · Laminate flooring in McKinney · Laminate flooring in Richardson · Laminate flooring in Murphy · Laminate flooring in Wylie · Laminate flooring installation in North Dallas. All of them are served from our Plano showroom. See flooring installation in Plano for every floor type.

Who installs your floor

  • In-house design and construction
  • Certified General Contractor
  • $1 million in insurance coverage
  • 500+ flooring and remodeling projects completed under Sami’s leadership
  • Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023)
  • 60+ years combined experience
  • Our installations include a written 1-year workmanship warranty
  • 0% financing available for qualified homeowners

Showroom: 2830 W. 15th St., Suite 1, Plano, TX 75075 · Mon–Fri 11–5, Sat 11–4, Sun closed.

Call (972) 746-1575 · Request an estimate

Laminate flooring questions

What AC rating should I buy?
AC3 for most rooms, AC4 for the hardest-working rooms: entries, game rooms, homes with large dogs.

Can laminate go in a kitchen?
Yes, with a quality water-resistant product and spills wiped promptly. If you want water off the worry list, choose luxury vinyl.

Why does some laminate sound hollow?
Usually because the subfloor underneath is not flat, or the underlayment is wrong. The floor flexes and taps. Proper flattening and the right pad prevent it.

Can laminate go over my existing tile?
Sometimes, if the tile is flat, solidly bonded and the extra height works at doors and transitions. Often removing it is the better long-term choice. Ask for the tile to be checked when your rooms are measured.

Are laminate stairs slippery?
They can be in socks. Choose a textured product, use proper nosings, or add a fastened runner.

Can a damaged plank be replaced?
Usually. A section can be unclicked or cut out and a spare plank fitted, which is why it pays to keep a few spares. For more on single-plank replacement, see laminate flooring in Richardson, a nearby city we serve.

Is laminate good with pets?
Its surface is one of the most scratch-resistant options available. The concern is accidents and water bowls: wipe them up promptly.

More answers are on our flooring installation FAQ.

Get a laminate estimate in Plano

Tell us which rooms you want done, and whether your stairs are included. We measure every room and every step and give you a detailed written estimate.

Call (972) 746-1575 · Request an estimate

We typically respond within 24 hours.

Ready to Transform Your Home?

Connect With Us Today

Call or Text (972) 746-1575

The Flooring & Remodeling Shop
2830 W. 15th St. Ste. 1, Plano, TX 75075
Serving Plano & North Dallas Suburbs