Wood Tile Flooring in McKinney, TX

Newly installed natural wood flooring in a living room

The old builder tile had white grout once. Now it is a gray grid that maps every path from the garage door to the refrigerator, and no amount of scrubbing brings it back. If you are choosing wood-look tile to replace it, the tile is not what keeps you up at night. The grout is: will the lines give the “wood” away, and will they end up looking like the floor you are tearing out?

Wood-look tile gives McKinney homeowners a floor that looks like hardwood but has the strength and moisture resistance of tile. The answer to the grout question depends on choices made before installation: the type of grout, its color, the joint width and how it is sealed. They decide how the floor looks on day one and after years of family life. This page explains each one.

For the product basics and layout rules, see our wood-look tile guide.

Call (972) 746-1575 · Request a written estimate

Grout types compared

GroutWhat it isStrengthsTrade-offs
Standard cement grout (sanded)Portland cement with sand, for joints about 1/8″ and widerFamiliar, affordable, easy to workPorous: should be sealed, and stains if neglected
Standard cement grout (unsanded)Cement without sand, for very narrow jointsFills tight joints smoothlyPorous; not for wide joints
High-performance cement groutPolymer-modified cement grouts, made to a higher industry standardBetter color consistency, less staining; some need no sealingCosts more than standard grout
Epoxy groutTwo-part resin and hardenerVery stain- and chemical-resistant; no sealing neededHarder to install; must be cleaned off the tile quickly; costs more
Urethane or acrylic premixedReady-to-use resin groutStain-resistant, consistent color, flexibleSpecific cure and cleanup rules; costs more

For a family kitchen or entry, a high-performance, epoxy or urethane grout usually pays for itself in less cleaning and no resealing. For low-traffic rooms, a well-sealed cement grout is fine.

Choosing a grout color that disappears

  • Match the tile’s main background tone, not its darkest grain. A close match lets the joints read as the gaps between wood boards.
  • Avoid stark white or very dark contrasts on wood-look tile unless you want the grid to show.
  • Mid-tones hide dirt well. Very light grout shows traffic paths first.
  • Test on the actual tile. Grout samples look different wet and dry, and next to the tile they are surrounded by. Make a small sample board before committing.

How joint width affects the look

Narrow joints look more like wood, but the minimum is not a style choice. The tile installation standard requires grout joints at least three times the tile’s actual size variation, so rectified (precisely cut) tile allows narrower joints than non-rectified tile. Our Murphy wood-tile page covers layout and joint rules in more detail.

Call (972) 746-1575 · Request an estimate

Grout problems, and what usually causes them

What you seeUsual causePrevention
Cracked grout along a lineMissing movement joints, or slab movement under the tileMovement joints at the perimeter and across large areas; crack isolation over slab cracks
Blotchy, uneven colorToo much water when mixing or cleaning, or uneven dryingMixing to the maker’s ratio; consistent cleanup; or a premixed, color-stable grout
A white, powdery hazeEfflorescence: salts carried to the surface by moistureProper curing; addressing moisture from below
Pinholes and sandy, crumbly jointsPoor packing, or washing too soonFirmly packed joints; waiting the specified time before cleanup
Grout dark in traffic paths onlyPorous cement grout, unsealed or sealer wornSealing on schedule, or a stain-resistant grout from the start

Keeping grout clean

  • Sweep or vacuum often. Grit in the joints is what wears grout down.
  • Use a pH-neutral cleaner made for tile and grout. Acidic or harsh cleaners can etch cement grout.
  • Reseal cement grout as the sealer manufacturer recommends; a drop of water that darkens the grout means it is time.
  • Deal with spills quickly, especially coffee, wine and oils, on any porous grout.
  • Use flexible caulk, not grout, where the tile meets the wall, the cabinets or the tub. Those are movement joints, and grout there will crack.

Wood-look tile in McKinney homes

About seven in ten McKinney homes were built in 2000 or later (U.S. Census Bureau, ACS 2020–2024 5-year estimates). If yours still has its original builder tile, the grout has had fifteen or more years of traffic. Removing that tile and its mortar, then grinding the slab flat, is the first step to a wood-look floor.

Call (972) 746-1575 · Request an estimate

From sample board to finished floor

  1. Selection: tile, grout type and color. Ask to see them together on a sample board.
  2. Measurements and inspection: slab flatness and cracks, transitions.
  3. Preparation: old floor out, slab leveled, crack isolation where needed.
  4. Setting: tiles set with full coverage and consistent joint widths.
  5. Grouting and sealing as the chosen grout requires, with caulk at walls and cabinets.

What a McKinney wood-tile floor costs depends on

  • The tile grade, size and number of unique faces;
  • The grout system: standard cement grout plus sealing, or a high-performance, urethane or epoxy grout;
  • Removing builder tile and grinding off old mortar;
  • Slab leveling and crack isolation;
  • Layout, trims and transitions.

Who does the work

  • In-house design and construction
  • Certified General Contractor
  • $1 million in insurance coverage
  • 500+ flooring and remodeling projects completed under Sami’s leadership
  • Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023)
  • 60+ years combined experience
  • Our installations include a written 1-year workmanship warranty
  • 0% financing available for qualified homeowners

Tile and grout samples are at our showroom, 2830 W. 15th St., Suite 1, Plano (Mon–Fri 11–5, Sat 11–4).

Call (972) 746-1575 · Request an estimate

Wood-look tile questions from McKinney homeowners

Where does epoxy grout make the most sense?
In kitchens, entries and homes with pets, because it resists stains and does not need sealing. It is harder to install, so ask whether your installer works with it regularly.

Which grout stains least?
Epoxy and urethane grouts are the most stain-resistant; high-performance cement grouts are close behind. Standard cement grout needs sealing to resist stains.

Does grout need to be sealed?
Standard cement grout does, and periodically after that. Epoxy grout and many urethane grouts do not.

What grout color should we choose?
One close to the tile’s main background tone, so the joints read as board gaps. Test it on a sample board.

Can old, stained grout be fixed instead of replacing the floor?
Sometimes, by deep cleaning, regrouting or color-sealing. If the tile itself is dated or cracked, replacing the floor makes more sense.

Is epoxy or urethane grout worth the extra cost?
In kitchens, entries and busy family rooms, usually yes: no resealing and far less staining. In a low-traffic room, a well-sealed cement grout is fine. See the flooring installation cost guide.

Get a wood-look tile estimate in McKinney

Tell us which rooms, and what bothers you about the floor you have now. You can see tile and grout samples at our showroom. We will measure and give you a detailed written estimate.

Call (972) 746-1575 · Request an estimate

We typically respond within 24 hours.

Related: Wood-look tile in Murphy · Hardwood flooring in McKinney · Luxury vinyl flooring in McKinney · Most durable kitchen flooring

Ready to Transform Your Home?

Connect With Us Today

Call or Text (972) 746-1575

The Flooring & Remodeling Shop
2830 W. 15th St. Ste. 1, Plano, TX 75075
Serving Plano & North Dallas Suburbs