Kitchen Remodeling in Allen, TX
The kitchens Allen homeowners are living with
If your kitchen dates from the late 1990s or 2000s, you may recognize some of the things owners most often want to change in kitchens of that era:
- Soffits above the upper cabinets, which waste space and date the room
- Upper cabinets that stop short of the ceiling, with a dust shelf on top
- Tile or laminate countertops, and a small island or none at all
- A kitchen walled off from the family room, or open on only one side
- Thin lighting: a single ceiling fixture or a few cans, with no under-cabinet light
- Too few outlets where you actually work, and none on the island
Partial update or full renovation?
| Partial update | Full renovation | |
|---|---|---|
| Choose it when | The layout works, but finishes feel dated | Flow, storage or the connection to the rest of the house is the problem |
| Typical work | Countertops, backsplash, cabinet refacing or replacement in place, lighting and fixtures, flooring | New cabinet layout, island changes, moved sink or range, new circuits, possibly a wall opened |
| Plumbing and electrical | Usually stays in place | Often relocated or added, which brings permits and inspections |
| Best for | A kitchen that is fundamentally sound | A kitchen that does not fit how the household lives now |
Taking out the soffits: what is usually inside
| Often inside a soffit | What happens when the soffit comes out |
|---|---|
| Nothing (an empty box) | It is removed, the ceiling is patched, and taller cabinets go in |
| A range hood or bath fan duct | The duct is rerouted through the ceiling or wall, or a smaller section of soffit stays to hide it |
| HVAC supply duct | Ductwork may be rerouted, or the soffit is rebuilt narrower over just the duct |
| Plumbing vent or drain from a bathroom above | Usually hard to move; a short section of soffit or a cabinet “chase” may remain |
| Electrical wiring | Rerouted, and the run is inspected |
- Cabinets that run to the ceiling, with no dust shelf on top;
- Stacked uppers: a standard cabinet with a shorter cabinet above it, often with glass doors, for seasonal items;
- Crown molding to finish the top line;
- A step stool drawer or pull-down shelves, so the highest storage is usable.
Opening the kitchen to the family room
- Is the wall load-bearing? If it is, removing it requires a properly sized beam and support, not just demolition. Our wall removal and load-bearing wall removal pages explain how that work is approached.
- What is inside it? Plumbing vents, electrical runs and ductwork often pass through kitchen walls and have to be rerouted.
- What happens to the floor? When a wall comes out, the two rooms’ floors usually need to become one continuous floor. See flooring installation.
Adding or enlarging an island
Many 1990s and 2000s Allen kitchens have a small island, or none. Before adding one, check the space and what it needs to connect to:
Changing appliances: gas, induction and the range hood
- Moving to induction or a larger electric range usually needs a dedicated 240-volt circuit of the right size, and enough capacity in the electrical panel.
- Moving to gas means a gas line to the new location, with permits and inspections.
- Upgrading the hood from a recirculating microwave to a ducted hood means a duct route to the outside, often through the space a soffit used to hide.
- Very powerful hoods can trigger a make-up air requirement. Under the residential code, a hood able to exhaust more than 400 cubic feet per minute may need a way to bring replacement air into the house, depending on the home. The city’s plan review settles it.
- A wall oven or microwave drawer changes the cabinet layout, so it is decided early.
Settle the appliance list before the cabinets are designed. Cabinets, circuits and gas lines are planned around it.
Flooring in an Allen kitchen remodel
- Under the cabinets or up to them? New flooring usually goes under new cabinets in a full renovation, but up to existing cabinets in a partial update.
- How far it runs. If the wall to the family room comes out, the kitchen floor should continue into the new open space.
- Which material: porcelain or wood-look tile for water resistance, luxury vinyl for comfort and quick installation, or hardwood for warmth with more care around the sink.
- Old tile removal: breaking out 1990s tile and its mortar is dusty work, and the slab underneath usually needs grinding and leveling.
What a kitchen remodel with us includes
- Cabinets: replacement, semi-custom options or refacing
- Countertops: templated, fabricated and installed for an exact fit
- Tile backsplashes: see tile installation
- Flooring coordinated with cabinets and appliances: see the most durable kitchen flooring options
- Plumbing and electrical coordination for relocated sinks, appliances, lighting and outlets
- Structural changes when a layout opens up
The full service overview, with design-build planning in detail, is on our main kitchen remodeling page.
How Allen’s permit rules apply to a kitchen remodel
Allen’s published exemptions are narrow, which matters for a kitchen:
- Electrical: the exemptions cover items such as reinstalling plug receptacles (but not new outlets), replacing breakers of the required capacity in the same location, and minor repairs like replacing lamps. New circuits, added outlets and new lighting circuits fall outside them.
- Plumbing: repairs are exempt only when they “do not involve or require the replacement or rearrangement of valves, pipes or fixtures.” Moving a sink, adding a pot filler or relocating the dishwasher rearranges pipes.
- Structural: opening a wall changes the structure.
In practice, a finish-only update may involve little or no permit work, while a full renovation almost always does. We pull the required permits and coordinate inspections, so they are part of the plan rather than a surprise.
Upgrades that still make sense in ten years
For owners who plan to stay, these tend to matter more than trend-driven finishes:
- Storage that fits how you cook:
deep drawers for pots, pull-outs, a pantry wall. - Layered lighting:
ceiling, task lighting under the upper cabinets, and island pendants. - Outlets where you work,
including on the island. - Ventilation that actually clears the air: a range hood sized and ducted for the cooktop.
- Durable work surfaces and flooring that handle daily use and the occasional spill.
- Room for the household to grow: seating at the island, a landing zone for groceries.
Where the budget goes, and where to save
Places not to save: the range hood duct, outlets and lighting, and drawer hardware you use every day.
How the project runs
Who does the work
- In-house design and construction team
- Certified General Contractor
- $1 million in insurance coverage
- NKBA affiliation
- 500+ flooring and remodeling projects completed under Sami’s leadership
- Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023)
- 0% financing available for qualified homeowners
Cabinet, countertop and tile samples are at our showroom, 2830 W. 15th St., Suite 1, Plano (Mon–Fri 11–5, Sat 11–4). Finished kitchens are in our project gallery.
Home remodeling questions from Frisco homeowners
Can you move the sink, range or other appliances?
Yes, layouts can be changed. Moving a sink or gas range relocates plumbing or gas lines, which in Allen means permitted work and inspections.
Do I need a permit for a kitchen remodel in Allen?
It depends on the scope. Allen’s exemptions do not cover new circuits, added outlets or rearranged plumbing, so most renovations need permits. A finish-only update may not. We confirm what applies and handle the permits.
Can the wall between the kitchen and family room come out?
Often, yes. If it is load-bearing, it needs a beam and support sized for the load, and anything running inside the wall has to be rerouted first.
How long does a kitchen remodel take?
It depends on the scope and on material lead times, especially for cabinets and countertops. You get a schedule with your written estimate.
How much does a kitchen remodel cost in Allen?
Cost follows scope: layout changes, cabinet type, countertop material and whether plumbing, electrical or walls move. Our kitchen remodeling cost guide explains the main drivers, and the estimate after a visit gives the real number.
What is inside our soffits, and can they come out?
Sometimes nothing; sometimes ducts, a plumbing vent or wiring. They can almost always come out, but whatever is inside has to be rerouted or kept in a smaller box. That is confirmed by opening a small section first.
Can we switch from electric to gas, or to induction?
Usually. Gas needs a new line and permits; induction or a larger electric range needs a dedicated 240-volt circuit and enough panel capacity.
How much room does island seating need?
NKBA recommends 24″ of width per person, with knee space 15″ deep at a standard 36″ counter.
Do you remodel small kitchens?
Yes. Small kitchens benefit most from better storage, layered lighting and a layout that removes wasted steps.