Kitchen Remodeling in Richardson, TX

Many Richardson kitchens were designed for a different way of living: a separate room for cooking, a galley or a U-shape closed off from the rest of the house, a few outlets and one ceiling light. Today the same kitchen has to power a coffee maker, an air fryer, a microwave and a dishwasher at once, and it is usually where everyone gathers. Remodeling a mid-century kitchen is as much about the layout and the systems behind the walls as it is about cabinets and countertops. This page covers both.

Richardson kitchens: older homes, older layouts

More than four in ten Richardson homes were built between 1950 and 1979, and the city’s median year built is 1986 (U.S. Census Bureau, ACS 2020–2024 5-year estimates). If your kitchen dates from that era, the starting point usually looks like one of these:

  • A galley kitchen: two parallel runs of cabinets, efficient for one cook, cramped for two.
  • A closed U- or L-shaped kitchen separated from the dining or family room by a wall.
  • An earlier remodel layered over the original: newer cabinets or counters on the same 1960s–70s footprint, wiring and plumbing.
Homes built after 2000 (about a third of Richardson) start from a different place: the layout is usually workable, and the project is closer to a finish upgrade.

Opening a closed or galley kitchen

The most transformative change in an older Richardson kitchen is usually the layout:
  • Galley to open plan: removing one side wall so the galley becomes an L with an island facing the family room.
  • Closed kitchen to kitchen-dining: taking down the wall to the dining room, with a peninsula or island marking the kitchen.
  • Relocating the sink or range so the work area faces the living space.

Each of these changes the structure or the plumbing. Whether a wall is load-bearing, what runs through it, and how the floors join afterward are covered on our wall removal and load-bearing wall removal pages.

When the wall cannot come out

Sometimes a wall carries a plumbing stack, a main duct or a structural load that makes full removal impractical or costly. A closed kitchen can still open up:

  • A wide opening in the wall, with a beam above, keeps part of the wall for the stack or duct while connecting the rooms.
  • A pass-through with a counter, so the cook can see and talk to the family room.
  • A peninsula off the remaining wall, creating seating and a soft divide.
  • Rethinking the galley itself: moving the refrigerator or pantry to one end, and keeping the main work zone along one run, so two people can pass. How much aisle each layout needs is explained on our Frisco kitchen page.

What turns up when old cabinets come out

Removing fifty-year-old cabinets often reveals conditions that shape the rest of the job:

  • Walls that are not straight or square. Older walls bow and corners drift out of square. New cabinets are shimmed and scribed to fit, and long countertops are templated to the real walls.
  • Floors that are not level. The floor under the old cabinets may be a different height from the rest of the room, or covered with older flooring layers. Very old vinyl flooring and adhesive should be tested for asbestos before it is disturbed (EPA).
  • Patched plaster or drywall from earlier remodels, which may need to be skimmed or replaced before a new backsplash.
  • A soffit above the old uppers. What tends to be inside one, and what replaces it, is explained on our Allen kitchen page.

Bringing the electrical up to a modern kitchen

Older kitchens were wired for fewer, smaller appliances. Today’s electrical code expects much more of a kitchen: the National Electrical Code requires two or more 20-ampere small-appliance branch circuits to serve kitchen countertop and wall receptacles (NEC 210.11(C)(1)), in addition to the circuits for major appliances. A full kitchen remodel is when the wiring is brought up to the current requirements for:

  • dedicated circuits for the dishwasher, disposal, microwave and refrigerator, as the appliances require;
  • countertop outlets spaced so there is power wherever you work, including on an island;
  • lighting circuits for recessed, under-cabinet and pendant lighting;
  • the panel capacity to carry it all.
In a home wired in the late 1960s or early 1970s, also check what kind of wiring it has. Our Richardson bathroom remodeling page explains the aluminum-wiring guidance for homes of that era, and the lead-safe rules that apply to painted surfaces in houses built before 1978.

Ventilation and plumbing in an older kitchen

  • Range ventilation: many older kitchens have a recirculating hood or none at all. A hood ducted to the outside, sized for the cooktop, keeps grease and moisture out of new cabinets and paint.
  • Supply and drain lines: once the cabinets are out, the decades-old lines behind them are exposed. That is the moment to replace them, before new cabinets and counters go back in front.
  • Gas lines: moving or adding a gas range means altering gas piping, which is permitted work.

Designing a kitchen that suits a mid-century house

Many Richardson homes from the 1950s–70s have low-slung, clean-lined architecture. A remodeled kitchen can feel modern and still belong to the house:

  • Flat-panel (slab) cabinet doors in warm wood or a solid color, rather than ornate raised panels;
  • Long, low lines: horizontal hardware, open shelving or a long run of uppers at one height;
  • Simple materials: quartz or solid surfaces in plain colors, with a tile backsplash in a simple pattern;
  • Light that matches the scale: recessed and under-cabinet light, with one or two statement pendants rather than many;
  • A floor that runs through to the living area. Narrow-strip or straight-grained oak suits the period; our Richardson hardwood page explains why older slabs need moisture testing first.

Remodeling a rental kitchen

About half of Richardson’s homes are rented. For a landlord, the goals are different: durable, easy to clean, quick to repair between tenants, and cost-effective.

  • Standard cabinet sizes and appliance widths, so replacements are easy to find;
  • Durable, low-maintenance countertops with few seams;
  • Waterproof flooring such as luxury vinyl or tile, with spare boxes kept for repairs;
  • A ducted hood and good lighting, which tenants notice and which protect the cabinets;
  • Shut-off valves that work under the sink and behind the refrigerator.

Share your turnover dates early so the schedule, permits and material lead times fit the vacancy.

What a Richardson kitchen remodel includes

  • Cabinets designed for the new layout, from replacement to semi-custom
  • Countertops templated after the cabinets are set
  • A backsplash: see tile installation
  • Flooring that joins the kitchen to the opened-up rooms: see flooring installation
  • Electrical, lighting, ventilation and plumbing updates
  • Structural work where walls move
The general service overview is on our main kitchen remodeling page.
Kitchen Remodeling Richardson TX with updated cabinetry and enhanced flooring

Permits and Richardson’s incentive program

Richardson requires a building permit for alterations, including plumbing, electrical and mechanical modifications, posted before work begins. Our Richardson shower remodeling page covers the city’s plan and scope requirements. We pull the required permits and coordinate inspections.

A full kitchen remodel may reach the $20,000 minimum for the City of Richardson’s Home Improvement Incentive Program. The application must be submitted before construction begins. See the city’s program page and our summary on the Richardson tub-to-shower page.

What drives the cost of an older-kitchen remodel

  • Size and shape: a larger shower means more waterproofing, tile and glass.
  • The drain: a linear drain or a moved drain adds work.
  • Tile: size, material and pattern; natural stone and large slabs cost more to install.
  • Niches, benches and shelves.
  • The glass: a frameless or custom enclosure costs more than a framed or standard one.
  • Plumbing changes: a new valve location, a second showerhead or a handheld.
  • Ventilation: a new or larger fan and duct.
For a fuller picture, see our bathroom remodeling cost guide. If your shower is already showing damage, our Richardson shower page explains when a repair is enough and when a rebuild is needed.

Who does the work

  • In-house design and construction team
  • Certified General Contractor
  • $1 million in insurance coverage
  • NKBA affiliation
  • 500+ flooring and remodeling projects completed under Sami’s leadership
  • Six-time Best of Plano award winner (2015, 2016, 2017, 2018, 2020, 2023)
  • 0% financing available for qualified homeowners

You can compare cabinet, countertop and tile samples at our showroom, 2830 W. 15th St., Suite 1, Plano (Mon–Fri 11–5, Sat 11–4), and see finished kitchens in our project gallery. Our kitchen remodeling process page explains each stage.

Kitchen remodeling questions from Richardson homeowners

Can a galley kitchen be opened up?

Usually, by removing one of the side walls. If that wall is load-bearing it needs a properly sized beam, and anything running inside it is rerouted first.

Will my older kitchen need electrical work?

Often, yes. Current code calls for multiple 20-amp countertop circuits plus dedicated appliance circuits, which kitchens wired decades ago often do not have.

Do I need a permit in Richardson?

For plumbing, electrical, gas or structural changes, yes. Richardson requires the permit to be approved and posted before work begins. We handle it.

Can I get the city incentive for a kitchen remodel?

If the project costs at least $20,000 and meets the city’s other requirements, it may qualify. Apply before construction starts. The city decides eligibility.

What if the wall between the kitchen and dining room cannot come out?

A wide opening with a beam, a pass-through counter or a peninsula can open the kitchen up while keeping the part of the wall that carries a plumbing stack or duct.

Will new cabinets fit our older, uneven walls?

Yes. Cabinets are shimmed and scribed to the real walls, and countertops are templated after installation, so they fit the room as it is.

What should a rental kitchen remodel focus on?

Durability, easy cleaning, standard sizes for quick repairs, and a schedule that fits the vacancy.

How long does a kitchen remodel take?

It depends on the layout changes, the electrical and plumbing work, inspections and cabinet lead times. You receive a schedule with your written estimate.

What does a kitchen remodel cost?

Layout changes, electrical upgrades, cabinet type and countertop material are the main drivers. See the kitchen remodeling cost guide.

Plan your Richardson kitchen

Tell us how the kitchen is laid out today, roughly when the house was built, and how you want to use the space, and we will outline what a remodel involves, from the walls to the wiring.
What happens next: a visit to measure and assess the layout and systems, then a written scope covering structure, electrical, plumbing, ventilation, permits and finishes.